Factory Demonstration
Photo of pipe exiting mill
during measurement
Typical Conditions
| Measurement spacing : |
20 cm |
| Pipe temperature: |
Up to 1250°C |
| Wall thickness : |
3 mm to 34 mm |
| Pipe diameter : |
4 cm to 15 cm |
| Pipe velocity : |
Up to 5 m/s |
| Measurement position |
At exit of forming mill |
Schematic drawing of measurement configuration
Measurement Data
Red dots: laser-based measurement at exit from mill
Triangles: transducer-based
hand measurement after
cooling
Measurements agree after correction
for thermal expansion
Laser Ultrasonics